DRAGON CAKE TOPPER

dragoncake

Oh the special requests I get from my children! This birthday Jack wanted a dragon-themed cake/party. Instantly my imagination goes wild with possibilities!

If you have a dragon-loving person in your life I have the perfect cake topper for you!

Simply print the template below on either colored or white cardstock, cut out pieces and attach the arm, leg, and wings with mini brads (I found mine in the papercraft section of Hobby Lobby). I glued the fire behind the mouth of the dragon after I wrote out my birthday message on it. Once everything is attached tape or glue a wooden skewer to the back of your dragon and stick it in your cake!

dragon-template

DOWNLOAD TEMPLATE HERE: dragon template

FullSizeRender (1)

Getting big brother involved! Loved that Joel asked if there was anything he could do to help!

FullSizeRender

Happy crafting!

xo.

Pete

 

Orange Dreamsicle Cake

orangedreamsiclecake

I’ve turned one of my all-time favorite ice cream treats into a light and refreshing cake!

When I asked my youngest son what kind of cake he would like for his birthday (which happens to be on the first day of spring) this was his request. I thought it sounded weird to use orange sherbet in an ice cream cake, but when I thought about those delicious Orange Dreamsicles I’d get from the ice cream truck, this totally made sense. This recipe is so simple it will make you scream for Orange Dream…sicle! Okay, nerdy chills happening!

ORANGE DREAMSICLE CAKE

ingredients:

1 white cake mix

1 container orange sherbet (1 QT 1 PT or 48 FL OZ)

3 cups heavy whipping cream

1 teaspoon vanilla

1/4 cup powdered sugar

method:

  1. Bake white cake in one 8″ round pan following instructions on the box (I used the egg white only version). You will have half the batter left over to do whatever you want with. I made 12 cupcakes.
  2.  In another 8″ round pan spray with cooking spray. Line the pan with two sheets of plastic wrap crossing them and creating a plus sign. Make sure the plastic wrap is up snug against the inside of the pan and has a few inches to hang over the pan.
  3. Scoop as much slightly softened orange sherbet into the pan as will fit. I used an extra deep 8″ pan for mine, but a regular size pan works too. Smooth out the sherbet using an offset spatula or the back of a spoon.
  4. Cover the top of the sherbet with another sheet of plastic wrap and place in the freezer to chill at least 30 minutes.
  5. Once the cake layer has cooled, wrap in plastic wrap and place it in the freezer to chill at least 30 minutes as well.
  6. Make your whipped cream icing! I like to chill my mixing bowl in the freezer for a few minutes before I get started on this. Fit your mixer with the whisk attachment. Pour heavy whipping cream into chilled mixing bowl. Add vanilla and powdered sugar and set at medium speed. Mix until cream begins to get pretty stiff. Add more powdered sugar if it isn’t sweet enough for you! Refrigerate until you’re ready to use it.

assembly:

  1. Unwrap your frozen white cake and place it on a cake board or cake stand. I like to drizzle a bit of honey down beforehand to get the cake to stick.
  2. Gently remove the sherbet layer from the pan. I used a helper to hold the pan while I tugged upward on the plastic wrap surrounding the sherbet. Stack sherbet layer on cake layer.
  3. Frost cake with whipped cream, smoothing sides and top as you go with a cake spatula or butter knife.
  4. Put in the freezer immediately after the cake is iced. Freeze for at least 30 minutes before serving. Serves 12

Enjoy!

–Pete

Feeling Lucky Banner

Are ya feelin’ lucky? This cute banner will put you in a lucky mood…or at the very least get you to finally take down those Valentine’s Day decorations! Ahem, Terese. Anywho, here’s what you’ll need to get started on this project:

17

  • glitter letters or gold glitter cardstock
  • green glitter cardstock
  • cute twine
  • scissors and/or Exacto knife
  • hot glue gun
  • printed clover & letters template  (click here: feelinglucky)

First of all, let me apologize now if you never purchased these adorable glitter letters from the Dollar Spot at Target last year. They make this project a snap! If you didn’t, I got you covered! Using the letter template I provided above will work just as well–it will just take a bit more time. If it makes you feel any better, I had to supplement a few missing letters myself!

To begin:

  1. Print out feelinglucky template.
  2. Either cut out items on template and trace around them onto the glitter paper or use transfer paper to transfer them onto the glitter paper. Note: Trace/transfer two clovers facing opposite directions. Also, be mindful that you need to have the letters backwards on the back of the glitter paper so they face the right direction on the glitter side!

11

3. Cut out images on the glitter paper. Small scissors work well, but you may need an Exacto knife for tight areas.

12

4. Lay all of your cut pieces out along your twine to help you determine spacing and how long your banner will be. I like to wait to cut the twine from the spool until I’ve done this and make sure to give myself a few extra inches.

5. Place a dab of hot glue on the top of each clover and letter and place it on its designated area of the twine. Make sure you are protecting your work surface with something that hot glue can be removed from easily (i.e. a plate or plastic cutting board). As each piece is cooling, gently lift from the work surface to ensure that it isn’t completely stuck to it.

7

6. Once the glue has cooled you’re ready to hang your banner!

6

May the luck of the Irish be with you!

xo.

Pete & Repeat

Toasted Coconut Layer Cake

coconutcake

Tuesday was my father-in-law’s 65th birthday. Whenever I am available (aka living in Utah) I always offer to make Wayne Harley Brachman’s version of coconut cake for his special day. It’s beautiful and a bit unconventional, just like my sweet father-in-law! However, a series of unfortunate events–catching a terrible cold, running out of ingredients, and having my car break down–led to me needing to shortcut this recipe! So here is my cheater version of dear Mr. Brachman’s cake:

TOASTED COCONUT LAYER CAKE

makes an 8″ cake that serves 12 people

for the cake:

1 box Duncan Hines yellow cake mix

2 Tbs. flour

3 eggs

1 stick butter, softened

3/4 cup milk (preferably at room temp.)

boiled icing with coconut:

1/2 lb. unsweetened coconut flakes (found in health food stores)

4 egg whites

2 cups sugar

1/2 tsp. cream of tartar

2/3 cup water

1/4 tsp. salt

2 tsp. vanilla

method:

  1. Preheat the oven to 350° and grease & flour two 8″ round cake pans.
  2. Empty the cake mix in a mixer bowl and add flour to it. Whisk or mix the ingredients together to break up clumps and blend.
  3. Add the rest of the cake ingredients and mix on low speed for 30 seconds. Stop mixer and scrape the sides of the bowl towards the center. Increase speed to medium-high for 2 minutes.
  4. Evenly distribute batter between the two cake pans and bake between 26-30 minutes or until tester comes out clean.
  5. When cakes are done baking place on a wire rack for ten minutes. After 10 minutes, gently remove cakes from pan and place directly on the wire rack until completely cool.

While the cakes are cooling, you can begin to work on the icing.

  1. Preheat or change the oven temperature to 325° and line a baking sheet with parchment.
  2. Evenly spread coconut over the baking sheet and bake for 3 minutes. For an even toasting, shift coconut around baking sheet with a spatula and turn pan. Bake an additional 3 minutes or until coconut edges begin to brown. Typically, they are ready when you can start smelling the coconut!
  3. Set coconut aside. Crack egg whites into a clean mixing bowl. Fit mixer with the whisk attachment. Mix on medium speed until egg whites are foamy and thick.
  4. In a medium sauce pan add sugar, cream of tartar, water, and salt and set to medium heat while whisking occasionally.
  5. Simmer/lightly boil sugar water mixture until temperature reaches softball stage (235°) on a candy thermometer.
  6. While the mixer is mixing the egg whites on low slowly pour sugar water into the egg whites.
  7. Continue to mix increasing the speed to medium. Add vanilla while mixing for about 2-3 minutes. Frosting should be stiff.

assembly:

  1. Divide icing into two bowls evenly. In one bowl mix in half of the coconut.
  2. With a large serrated knife cut the two cool cakes into four layers total.
  3. Place the first layer on a cake plate and top with coconut icing. Continue this process with each layer until you get to the last one.
  4. Once the cake is assembled frost the entire cake in the plain icing making sure it is smooth and even.
  5. Gently press remaining coconut around the sides of the cake. I like to leave the top coconut free like Wayne does. This gives the cake an ultra sharp appearance!
  6. Refrigerate cake until you’re ready to eat!

oldcoconutcake

I hope all of these steps don’t intimidate you! Learning to make this simple boiled icing will expand your cake-making repertoire and give you the courage to try others like swiss meringue! Let me know how it goes!

xo.

Pete

TIP: Keep all of the eggs you need for this recipe out on the counter to get to room temperature (along with the butter). This helps the eggs separate and blend with batter easier.

_kenhat

How to Host a Killer Nerf Party

akigun

When it comes to six-year-old boys it’s fairly safe to assume they are packed with energy and LOVE to shoot stuff! My sister-in-law, Rachel, had the brilliant idea to throw her son a Nerf party for his sixth birthday. Originally she planned to have this party outdoors, but the weather in Utah in January was not cooperating! She came up with some creative ideas to make this party just as fun indoors.

To start this party off right, Rachel set out a row of Nerf guns for each attendee to take home as a party favor and use during the party. She got an amazing after Christmas deal on these babies at Target online. You could also suggest attendees bring their own guns if they have them on the invitation.

guns

She also purchased plenty of Nerf darts using Wish. Seriously discounted darts. No, seriously–check it out! Just plan well in advance because shipping takes some time!

Rachel and her husband, Hiro set up super fun target stations all through the house using cardboard boxes, duct tape, printed targets, army men, and balloons. So clever and the kids loved it!

baloons

Each balloon target was worth a different amount of points.

bigcardboardtarget

Check out the little spinners on these targets!

armyguys

I just love the army guys!

moretargets

Cute baby brother is locked and loaded–LOOK OUT!

I also love how everything ended up color-coordinated. Rachel stuck to a simple palette of red, blue, orange, and white. Even the guns and darts matched the party!

For food, Rachel kept it simple and ordered pizza–always a crowd pleaser!

eating

And for the cake, the birthday boy’s request: Vanilla cupcakes with a peach filling and peach buttercream icing, decorated with a fondant target and sprinkles (made by me!).

tagetcaketower

In case you need a close-up of that luscious peach buttercream:

img_2664

I want to thank Rachel for sharing this special day with us! Hopefully this post inspires you for future parties and events!

Click here to download printable targets for your own party: target

xo.

Pete

Note: To avoid injuries set ground rules before the party gets going. For example, only shoot at targets, not people! –Just thought I should add that! 😉

 

 

Valentine’s Day Gift Guide For Kids

vdaygiftguide

How many years in a row have I completely forgotten to grab a little gift for my kids on Valentine’s day?! I guess all the running around, buying school treats, making class Valentines, organizing class parties, and planning a date night with my main squeeze has me a bit preoccupied!

This year, I vow to be better. So when the kids come home from school with high hopes of rosy colored balloons and chocolates I will be ready! I did some online browsing at Target and came up with these ideas.

xo.

Pete

WATERCOLOR & SALT HEART PROJECT

When I was first learning how to paint with watercolors I was taught a technique of adding salt to my painting to create an interesting design and texture. This little trick has stuck with me for years and popped in my head when I was thinking about ways to get festive for Valentine’s Day. This project is fun and simple enough to involve even the the tiniest of hands!

To make these lovely, and very versatile hearts, you will need:

  • watercolor paints (any quality will do!)
  • watercolor paper
  • scissors
  • paint brushes
  • salt
  • heart-shaped cookie cutter or stencil
  • a jar full of clean water
  • paper towels (to sop up excess water)

8

To get started, allow yourself to experiment with the paint. Try using concentrated amounts of paint in some areas and watered down paint in others.

12

Terese and I decided to limit the colors we used to create a Valentine’s Day palette (however, there was no limiting our helpers!).

Once you have painted an area of your paper, sprinkle the wet paint with salt.

10

The salt will create the most beautiful texture:

5

I recommend painting the entire paper to maximize the amount of hearts you can make!

Once you have finished your paintings lay them out to dry. When the paintings are dry turn them over to the backside and trace as many heart as you can fit on the paper. You may have some excess salt rub off of the paper, but fear not, the design will stay in tact!

4

Next, cut out all of your traced hearts. **Yes, mama needs a manicure!**

13

Voila! You have dozens of beautiful hearts!

14

With these babies, the possibilities are endless!

Sew them together to make garland. Glue them to card stock to make a special Valentine. Affix them to bags to make party favors.

2

I hope you’ll give this project a try! Let me know how it works out for you!

xo,

Pete